MB90F456SPMCR-G

Product Overview

Category: Microcontroller
Use: Embedded systems, automotive applications
Characteristics: High-performance, low-power consumption, advanced peripherals
Package: LQFP-100
Essence: 16-bit microcontroller with integrated flash memory
Packaging/Quantity: Tray packaging, quantity varies

Specifications

Architecture: CISC
Bit Size: 16-bit
Clock Speed: Up to 20 MHz
Flash Memory: 256 KB
RAM: 12 KB
Operating Voltage: 2.7V - 5.5V
I/O Pins: 82
Communication Interfaces: UART, SPI, I2C
Timers/Counters: 8-bit and 16-bit timers/counters
Analog-to-Digital Converter (ADC): 10-bit resolution, 8 channels
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB90F456SPMCR-G microcontroller has a total of 100 pins in the LQFP package. The pin configuration is as follows:

VDD
P0.0
P0.1
P0.2
P0.3
P0.4
P0.5
P0.6
P0.7
P1.0
P1.1
P1.2
P1.3
P1.4
P1.5
P1.6
P1.7
P2.0
P2.1
P2.2
P2.3
P2.4
P2.5
P2.6
P2.7
P3.0
P3.1
P3.2
P3.3
P3.4
P3.5
P3.6
P3.7
P4.0
P4.1
P4.2
P4.3
P4.4
P4.5
P4.6
P4.7
P5.0
P5.1
P5.2
P5.3
P5.4
P5.5
P5.6
P5.7
P6.0
P6.1
P6.2
P6.3
P6.4
P6.5
P6.6
P6.7
P7.0
P7.1
P7.2
P7.3
P7.4
P7.5
P7.6
P7.7
P8.0
P8.1
P8.2
P8.3
P8.4
P8.5
P8.6
P8.7
P9.0
P9.1
P9.2
P9.3
P9.4
P9.5
P9.6
P9.7
P10.0
P10.1
P10.2
P10.3
P10.4
P10.5
P10.6
P10.7
RESET
XTAL1
XTAL2
VSS
AVDD
AVREF
VREFH
VREFL
VBAT
VSS
VDD

Functional Features

High-performance 16-bit microcontroller suitable for embedded systems and automotive applications.
Low-power consumption design for energy-efficient operation.
Advanced peripherals including UART, SPI, I2C, timers/counters, and ADC.
Integrated flash memory for program storage.
Wide operating voltage range allows flexibility in power

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MB90F456SPMCR-G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of MB90F456SPMCR-G in technical solutions:

Q: What is MB90F456SPMCR-G? A: MB90F456SPMCR-G is a microcontroller unit (MCU) manufactured by Fujitsu. It is designed for use in various technical solutions.
Q: What are the key features of MB90F456SPMCR-G? A: Some key features of MB90F456SPMCR-G include a high-performance 16-bit CPU, on-chip flash memory, multiple communication interfaces, and various peripheral functions.
Q: In which applications can MB90F456SPMCR-G be used? A: MB90F456SPMCR-G can be used in a wide range of applications such as industrial automation, automotive systems, consumer electronics, and medical devices.
Q: What is the maximum clock frequency supported by MB90F456SPMCR-G? A: MB90F456SPMCR-G supports a maximum clock frequency of 20 MHz.
Q: Does MB90F456SPMCR-G have built-in analog-to-digital converters (ADCs)? A: Yes, MB90F456SPMCR-G has built-in 10-bit ADCs, which can be used for analog signal measurements.
Q: Can I connect external memory to MB90F456SPMCR-G? A: Yes, MB90F456SPMCR-G supports external memory expansion through its memory bus interface.
Q: What programming languages can be used to develop software for MB90F456SPMCR-G? A: Software for MB90F456SPMCR-G can be developed using C or assembly language.
Q: Does MB90F456SPMCR-G have any power-saving features? A: Yes, MB90F456SPMCR-G offers various power-saving modes and features to optimize energy consumption in battery-powered applications.
Q: Can MB90F456SPMCR-G communicate with other devices using serial communication protocols? A: Yes, MB90F456SPMCR-G supports multiple serial communication interfaces such as UART, SPI, and I2C.
Q: Is there any development toolchain available for programming MB90F456SPMCR-G? A: Yes, Fujitsu provides a comprehensive development toolchain, including an integrated development environment (IDE) and debugging tools, to facilitate software development for MB90F456SPMCR-G.

Please note that the answers provided here are general and may vary depending on specific requirements and configurations of the technical solution.