Zie specificaties voor productdetails.
MB90349CASPFV-G-252E1
Product Overview
Category
The MB90349CASPFV-G-252E1 belongs to the category of microcontrollers.
Use
This microcontroller is designed for various applications that require high-performance processing and control capabilities.
Characteristics
- High-performance processing capabilities
- Advanced control features
- Compact size
- Low power consumption
Package
The MB90349CASPFV-G-252E1 comes in a compact package, suitable for integration into various electronic devices.
Essence
The essence of this microcontroller lies in its ability to provide efficient processing and control functions for a wide range of applications.
Packaging/Quantity
The MB90349CASPFV-G-252E1 is typically packaged individually and is available in various quantities depending on the requirements of the user.
Specifications
- Architecture: 32-bit RISC
- Clock Speed: 100 MHz
- Flash Memory: 512 KB
- RAM: 64 KB
- Operating Voltage: 3.3 V
- I/O Pins: 48
- Communication Interfaces: UART, SPI, I2C
- Analog-to-Digital Converter (ADC): 12-bit, 8 channels
- Timers/Counters: 4
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MB90349CASPFV-G-252E1 has a total of 48 pins, each serving a specific purpose. The pin configuration is as follows:
(Pin Number) - (Pin Name) - (Function) 1 - VDD - Power Supply 2 - GND - Ground 3 - RESET - Reset Input 4 - XTAL1 - Crystal Oscillator Input 5 - XTAL2 - Crystal Oscillator Output 6 - P0.0 - General Purpose I/O 7 - P0.1 - General Purpose I/O 8 - P0.2 - General Purpose I/O 9 - P0.3 - General Purpose I/O 10 - P0.4 - General Purpose I/O 11 - P0.5 - General Purpose I/O 12 - P0.6 - General Purpose I/O 13 - P0.7 - General Purpose I/O 14 - P1.0 - General Purpose I/O 15 - P1.1 - General Purpose I/O 16 - P1.2 - General Purpose I/O 17 - P1.3 - General Purpose I/O 18 - P1.4 - General Purpose I/O 19 - P1.5 - General Purpose I/O 20 - P1.6 - General Purpose I/O 21 - P1.7 - General Purpose I/O 22 - P2.0 - General Purpose I/O 23 - P2.1 - General Purpose I/O 24 - P2.2 - General Purpose I/O 25 - P2.3 - General Purpose I/O 26 - P2.4 - General Purpose I/O 27 - P2.5 - General Purpose I/O 28 - P2.6 - General Purpose I/O 29 - P2.7 - General Purpose I/O 30 - P3.0 - General Purpose I/O 31 - P3.1 - General Purpose I/O 32 - P3.2 - General Purpose I/O 33 - P3.3 - General Purpose I/O 34 - P3.4 - General Purpose I/O 35 - P3.5 - General Purpose I/O 36 - P3.6 - General Purpose I/O 37 - P3.7 - General Purpose I/O 38 - P4.0 - General Purpose I/O 39 - P4.1 - General Purpose I/O 40 - P4.2 - General Purpose I/O 41 - P4.3 - General Purpose I/O 42 - P4.4 - General Purpose I/O 43 - P4.5 - General Purpose I/O 44 - P4.6 - General Purpose I/O 45 - P4.7 - General Purpose I/O 46 - VSS - Ground 47 - AVDD - Analog Power Supply 48 - AVSS - Ground
Functional Features
The MB90349CASPFV-G-252E1 microcontroller offers the following functional features:
- High-speed processing capabilities for efficient execution of complex algorithms.
- Advanced control features, enabling precise control of connected devices.
- Multiple communication interfaces (UART, SPI, I2C) for seamless integration with other components.
- Built-in analog-to-digital converter (ADC) for accurate measurement and monitoring of analog signals.
- Timers/counters for precise timing and event management.
Advantages and Disadvantages
Advantages
- High-performance processing capabilities enable efficient execution of complex tasks
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MB90349CASPFV-G-252E1 in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of MB90349CASPFV-G-252E1 in technical solutions:
Q1: What is the MB90349CASPFV-G-252E1? A1: The MB90349CASPFV-G-252E1 is a microcontroller unit (MCU) manufactured by Fujitsu. It is commonly used in various technical solutions.
Q2: What are the key features of the MB90349CASPFV-G-252E1? A2: Some key features of the MB90349CASPFV-G-252E1 include a high-performance CPU, on-chip flash memory, multiple communication interfaces, and various peripheral functions.
Q3: What technical solutions can the MB90349CASPFV-G-252E1 be applied to? A3: The MB90349CASPFV-G-252E1 can be applied to a wide range of technical solutions, including industrial automation, automotive systems, consumer electronics, and more.
Q4: How does the MB90349CASPFV-G-252E1 support industrial automation applications? A4: The MB90349CASPFV-G-252E1 offers features like real-time control, analog-to-digital conversion, and communication interfaces that make it suitable for industrial automation applications.
Q5: Can the MB90349CASPFV-G-252E1 be used in automotive systems? A5: Yes, the MB90349CASPFV-G-252E1 is designed to meet the requirements of automotive applications, such as engine control, body control modules, and instrument clusters.
Q6: Does the MB90349CASPFV-G-252E1 support communication interfaces? A6: Yes, the MB90349CASPFV-G-252E1 supports various communication interfaces, including UART, I2C, SPI, and CAN, making it suitable for applications that require data exchange.
Q7: Can the MB90349CASPFV-G-252E1 be programmed? A7: Yes, the MB90349CASPFV-G-252E1 has on-chip flash memory that can be programmed to store the application code and data.
Q8: What are the power requirements for the MB90349CASPFV-G-252E1? A8: The MB90349CASPFV-G-252E1 typically operates at a supply voltage of 3.3V, but it also supports a wide voltage range for flexibility in different applications.
Q9: Are there any development tools available for the MB90349CASPFV-G-252E1? A9: Yes, Fujitsu provides development tools like compilers, debuggers, and integrated development environments (IDEs) to facilitate software development for the MB90349CASPFV-G-252E1.
Q10: Where can I find more information about the MB90349CASPFV-G-252E1? A10: You can find more detailed information about the MB90349CASPFV-G-252E1, including datasheets, application notes, and technical support, on Fujitsu's official website or by contacting their customer support.