ABLIC U.S.A. Inc.
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
S-1172B48-E6T1G
Details bekijken DataSheets

S-1172B48-E6T1G

Product Overview

Category

The S-1172B48-E6T1G belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits and devices.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Low Dropout Voltage: 160mV @ 150mA
  • Package Type: SOT-23-5
  • Low Power Consumption

Package

The S-1172B48-E6T1G is available in a SOT-23-5 package.

Essence

This voltage regulator provides stable and reliable voltage output for various electronic applications.

Packaging/Quantity

The product is typically packaged in reels with a quantity specified by the manufacturer.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 150mA
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

The S-1172B48-E6T1G has five pins arranged as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. CE (Chip Enable)

Functional Features

  • Low dropout voltage
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Wide input voltage range
  • Stable and reliable output voltage
  • Small package size
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Restricted operating temperature range

Working Principles

The S-1172B48-E6T1G operates by comparing the reference voltage with the feedback voltage to control the output voltage, ensuring a stable and regulated output regardless of variations in the input voltage.

Detailed Application Field Plans

The S-1172B48-E6T1G is commonly used in battery-powered devices, portable electronics, and low-power applications where a stable voltage supply is essential.

Detailed and Complete Alternative Models

  • S-1172 Series by Seiko Instruments
  • LM1117 Series by Texas Instruments
  • MCP1700 Series by Microchip Technology

Note: The above alternative models provide similar voltage regulation capabilities and can be considered as alternatives to the S-1172B48-E6T1G.

This content provides a comprehensive overview of the S-1172B48-E6T1G, covering its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van S-1172B48-E6T1G in technische oplossingen

  1. What is S-1172B48-E6T1G?

    • S-1172B48-E6T1G is a low dropout voltage regulator (LDO) designed for use in various technical solutions to provide stable and regulated power supply.

  2. What is the input voltage range for S-1172B48-E6T1G?

    • The input voltage range for S-1172B48-E6T1G is typically between 2.5V and 16V.

  3. What is the output voltage of S-1172B48-E6T1G?

    • The output voltage of S-1172B48-E6T1G is fixed at 4.8V.

  4. What is the maximum output current of S-1172B48-E6T1G?

    • The maximum output current of S-1172B48-E6T1G is typically 1A.

  5. What are the typical applications of S-1172B48-E6T1G?

    • S-1172B48-E6T1G is commonly used in battery-powered devices, portable equipment, and other applications requiring a stable 4.8V power supply.

  6. What are the key features of S-1172B48-E6T1G?

    • Some key features of S-1172B48-E6T1G include low dropout voltage, low quiescent current, thermal shutdown protection, and overcurrent protection.

  7. What are the recommended input and output capacitors for S-1172B48-E6T1G?

    • It is recommended to use a 10μF ceramic capacitor at the input and a 22μF ceramic capacitor at the output for optimal performance.

  8. Is S-1172B48-E6T1G suitable for automotive applications?

    • Yes, S-1172B48-E6T1G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  9. Does S-1172B48-E6T1G require any external components for operation?

    • S-1172B48-E6T1G requires minimal external components for operation, making it easy to integrate into various technical solutions.

  10. What are the operating temperature and package type of S-1172B48-E6T1G?

    • S-1172B48-E6T1G has an operating temperature range of -40°C to 85°C and is available in a small SOT-89 package for space-constrained applications.